Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 3
  6. : How to disassemble and remove the central tunnel panel on BMW 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Central tunnel
Operation: How to disassemble and remove the central tunnel panel on BMW 3 Series

Let's see how to disassemble and remove the central tunnel panel on BMW 3 Series. Bring the gear knob vertically, then, with a plastic lever, lever off the lining placed in the lower part of the central tunnel. After removing the plastic covering, unscrew the screws under the disassembled mask with a screwdriver. Once this operation has been carried out, let's pull away the control unit control wheel (disconnect any power cables). Finally we insert the new piece in the plastic covering the tunnel and reassemble all the components.


Posted on 19 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos