Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to remove the central tunnel cover of a BMW

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Central tunnel
Operation: How to remove the central tunnel cover of a BMW

Do you want to remove the central tunnel cover of a BMW 3 Series? Let's see how to proceed in this video. Place the gear knob in a vertical position and pull it away with your hands, then, with a plastic spatula, remove the gear knob cover lever. Immediately afterwards, we always remove the cover of the cap frame with the spatula and pull it off. Now let's move on to remove the lining of the central tunnel with attached power cables. Once the piece of the trim is removed, we unscrew the gearbox wheel and the glove box.


Posted on 30 September 2023 by ScegliAuto

Other guides that may interest you

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos