|
Do it yourself
| |||
| ||||
Testing Instrument Cluster Replacement
Model: BMW Serie 3
E46
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
This video aims to provide a simple demonstration of what could happen when replacing your original instrument cluster with an identical one from another vehicle, rather than teaching you the work phases for disassembling the instrument cluster. From the initial sequences, you can see the original instrument cluster with the correct mileage and the only two warning lights on, which relate to components that have been removed beforehand. Now disconnect the connectors at the back by pressing the tab to release the retaining ring. Connect the other instrument cluster and turn off and then restart the engine. As you can observe, the mileage has changed because it refers to the car it was installed in. Additionally, the brake light has turned on (which goes from yellow to red when you pull the handbrake) and the traction control light has also illuminated. The only solution for this issue is to reset the cluster by a specialized technician. Car model: BMW E46 Series 3 Year: 2001
Updated on 15 February 2026 by ScegliAuto
Related tutorials
BMW Serie 3
(1998-2006 /
E46)
Are the instrument cluster bulbs damaged? Let's see how to remove the instrument cluster. Remove the instrument cluster mounting screws, pry the inst…
BMW Serie 3
(1998-2006 /
E46)
How do you remove the instrument cluster to replace the LEDs in the BMW 3 Series? Let's carefully see in this video how to proceed with the correct d…
BMW Serie 3
(2005-2013 /
E92, E91, E90)
Is the battery on your BMW 3 due for replacement? Let's go through the battery removal process. Open and lift the trunk lid. Remove the carpeted cove…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris
These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |