Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on BMW 3

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

Is the battery on your BMW 3 due for replacement? Let's go through the battery removal process. Open and lift the trunk lid. Remove the carpeted cover in the trunk on the right side.

Access the battery kit: loosen the battery hold-down bolts; remove the battery from its compartment. Insert the new battery into the designated space.

Connect the terminals to the battery and tighten the screws. Reinstall the side cover of the trunk and close the trunk lid. Perform a vehicle functionality test: start the vehicle with the key and check.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a BMW 3 Series
How to Replace the Battery in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Here’s how to replace the battery in a BMW 3 Series: open the trunk of the car (in BMWs, the battery is located in the rear) and remove the fabric/pl…
How to Open the Trunk with a Dead Battery on BMW 3 Series
How to Open the Trunk with a Dead Battery on BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In this video tutorial, you will see a simple solution to open the trunk with a dead battery, and therefore without a remote, on a BMW 3 Series F30 a…
Battery Replacement on BMW 3 Series
Battery Replacement on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Is the battery on your BMW 3 Series dead? Do you want to replace it? Let's go through the battery removal process. Open and lift the trunk lid. Remov…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the battery of the BMW 3 Series located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos