Do it yourself
Frequently asked questions about cars and motorcycles

Battery Replacement on BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Battery

Is the battery on your BMW 3 Series dead? Do you want to replace it? Let's go through the battery removal process. Open and lift the trunk lid. Remove the carpeted cover in the trunk on the right side. Access the battery kit: loosen the battery hold-down bolts; disconnect the terminals and remove the battery from its compartment. Insert the new battery into the trunk. Connect the terminals to the battery and tighten the screws. Reinstall the side cover of the trunk and close the trunk lid. Start the vehicle with the key and check the battery operation.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will learn how to remove and replace the battery of the BMW 3 Series, as well as the 1 Series and 2 Series. First, loc…
BMW Serie 3 (1998-2006 / E46) Before starting, open the trunk of your BMW 3 Series. Begin by prying off and removing the top cover of the battery. Next, remove the cover from the …
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you begin, open the trunk of your BMW 3 Series. Start by removing the left inner side cover of the trunk. This will give you access to the bat…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the battery of the BMW 3 Series located? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos