Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Handle of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Handle

In this brief and simple guide, you will see the steps to remove and replace the outer handle of the front door of the BMW 3 Series. First, open the front door of your car and start by removing the small rubber cap located on the side. Then, use the appropriate wrench to unscrew the screw of the rectangular cap found at the end of the outer handle, as shown in the video. At this point, remove and replace the outer handle with the new one of the correct type, applying the reverse procedure for reassembly!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handle of the BMW 3
How to Remove the Handle of the BMW 3
BMW Serie 3 (1998-2006 / E46) Remove the outer door handle of the BMW? Let's take off the handle from the 3 Series. Move the plastic cover at the top of the door, then unscrew the…
Replacement of the interior door handle of the BMW 3 Series.
Replacement of the interior door handle of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F30, F31) Today's steps will show us how to disassemble and replace the interior handle of the front door of the BMW 3 Series. First, we open the front or rear…
How to replace the door handle of the BMW 3 Series
How to replace the door handle of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) These short and simple instructions will show us the process of disassembling and replacing the interior handle of the front door of the BMW 3 Series…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos