Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Power Window Motor in Your Car

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Power window motor

See other generations:
Video tutorial

The first step to replace the power window motor in your car is to purchase a new one. Following the instructions provided in the guide, the replacement procedure will be quite simple, allowing you to avoid damaging your vehicle and not spending too much time.

To access the motor, you will need to remove the door panel and unscrew the screws located around the handle and buttons.

Once you locate the component of interest, disconnect all the electrical wires that power it. After freeing the glass from the guide, support it to prevent it from falling and secure it with a screwdriver to avoid it dropping.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to reset the window regulator motor of the BMW Series 3.
How to reset the window regulator motor of the BMW Series 3.
BMW Serie 3 (1998-2006 / E46) Today's instructions will show us how to reset the window regulator motor of the BMW Series 3. First, let's get inside the vehicle and start by turni…
Replace Window Regulator Motor on BMW 3 Series
Replace Window Regulator Motor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Is the window regulator not working on your BMW 3 Series? Remove the door panel cover to access the interior. Disconnect the battery terminals for sa…
Removing the Window Regulator Mechanism
Removing the Window Regulator Mechanism
BMW Serie 3 (1998-2006 / E46) To remove the window regulator mechanism, first, you need to take off the door panel by removing the corresponding mounting screws (under the handle …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos