Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the speaker fuses located in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

The speaker fuse is located in the fuse box inside the cabin: to access this box, open the glove compartment on the passenger side. Once the compartment is open, you can remove the protective panel of the box to access the underlying fuses.

The speaker fuse is labeled with the number 34 and is the one in the top right of the center row: it should be pulled out using a special tool and replaced with a new part of the same amperage.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) The fuses in the BMW 3 Series are located inside the designated fuse boxes within the vehicle. For the BMW 3 Series, open the trunk and lift the carp…
Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) The fuses of the BMW 3 Series are located inside two fuse boxes installed in the vehicle: the first is situated inside the cabin, immediately behind …
Replacing the Speakers in the BMW 3 Series
Replacing the Speakers in the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide will show you how to remove and replace all the speakers in the BMW 3 Series, following the instructions below. First, get inside the vehi…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos