Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of the BMW 5 Series?

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Door trim panel

See other generations:
Video tutorial

To remove the rear door panel of the BMW 5 Series, start by removing the cover panel that hides the screw inside the internal handle area. Once this screw is loosened, also loosen the one located at the top of the armrest.

After unscrewing both screws, begin detaching the internal clips of the panel starting from the bottom. Then, disconnect the connectors inside to completely remove the panel and replace it with a new one. Secure the new panel by tightening the screws that were removed earlier.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

Removing the Rear Door Panel of the BMW 5 Series
Removing the Rear Door Panel of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Today, let's go over the instructions to remove and replace the rear door panel of the BMW 5 Series. First, open the rear door of the vehicle and sta…
How to Remove the Rear Door Panel of the BMW 5 Series
How to Remove the Rear Door Panel of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, let's go through the procedure for removing the rear door panel of the BMW 5 Series. First, open the rear door of the vehicle and start by rem…
How to Remove the Rear Door Panel of the BMW 5 Series
How to Remove the Rear Door Panel of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) .. In this video tutorial, you will learn how to remove the rear door panel of the BMW 5 Series by following these simple and quick steps. First,.. …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos