Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Intake Manifold Gasket

Model: BMW Serie 5 E34 - Years 1988-1995
Part: Engine

Before installing the new intake manifold gaskets, it is essential to clean the gasket seats on both the manifold side and the cylinder head. Remove any residue that could compromise the adhesion and sealing of the gaskets, which would negatively affect engine performance. Once the cleaning phase is complete, apply the new gaskets, which consist of six pieces, each to be installed on a single cylinder, fitting them onto the dowel pins. Finally, install the manifold and tighten the mounting nuts.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Assembly of the Intake Manifold Connector
Assembly of the Intake Manifold Connector
BMW Serie 5 (1995-2003 / E39) The intake manifold is a crucial component of the engine's fuel system that positively influences fuel consumption. The assembly steps for the intake…
Maintenance of the Car Intake Manifold
Maintenance of the Car Intake Manifold
BMW Serie 5 (1995-2003 / E39) For optimal engine performance, it is essential to have a good air-gasoline mixture ratio at the carburetor. Air enters the carburetor through the in…
Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
BMW Serie 5 (1988-1995 / E34) Before applying the new gasket to the exhaust manifold, thoroughly clean the gasket seating on both the manifold side and the cylinder head side to r…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos