Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset after MOT on a BMW E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Warning light – error code

In this video we will see how to carry out a service reset on a BMW 3 Series E46, after an overhaul. Being an older model of car we will find the button on the left of the odometer display. First, turn on the instrument panel, then press the same button until the wording TEST appears, release the button and press again for 10 seconds until the word RESET appears at the top and SERVICE at the bottom, release the button for a few moments and press it again for 5 seconds to give the ok, at this point only RESET will appear and continue to press the fibo key until the END message will finally appear, indicating the end and correct success of the procedure.

Posted on 13 March 2023 by ScegliAuto

Video tutorial

Related tutorials

BMW 3 Series E46 oil warning light reset
BMW 3 Series E46 oil warning light reset
BMW Serie 3 (1998-2006 / E46) In today's video tutorial we will see how to reset the oil warning light on a BMW 3 Series E46. First we get on board the passenger compartment and t…
How to reset the services on the BMW E46.
How to reset the services on the BMW E46.
BMW Serie 3 (1998-2006 / E46) To reset the warning lights on a BMW E46, you need to follow this procedure: turn off the car, once the car is off, press and hold the reset button l…
How to reset the brake pad warning light on the BMW 3 Series E46 version.
How to reset the brake pad warning light on the BMW 3 Series E46 version.
BMW Serie 3 (1998-2006 / E46) In this video, we will see how to reset the brake pads warning light on a BMW 3 Series E46 version: after replacing the brake pads, we still have the…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2012-2019 - Where is the paint code of the BMW 3 series 320d located? Read answer

How to Replace the Thermostat on a Fiat Punto 2 Series 8v

When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly under the ignition coils. To facilitate the replacement, disconnect the intake duct hose and remove the coil pack. At this point, disconnect the connector from the thermostat and proceed to remove the corresponding fixing pins to replace it with the new one, ensuring to use a new gasket.

Watch the video!


by ScegliAuto

More videos