Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shift Knob on a BMW 3 Series E90

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Shift knob

If the shift knob on your BMW 3 Series E90 is excessively worn and you want to replace it yourself, follow the steps outlined in this guide. First, park the vehicle safely and turn it off completely. Next, grasp the shift knob and pull it upward firmly, being careful not to damage it. Once removed, take the new compatible shift knob and install it correctly. Ensure there is no lateral play, and finally, perform a few test shifts.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Shift Knob on a BMW 3 Series E90
Replacing the Shift Knob on a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will find instructions on how to remove and replace the shift knob in a BMW 3 Series E90 in simple steps. First, get insi…
How to Remove the Shift Knob on BMW 3 Series E90
How to Remove the Shift Knob on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will learn how to remove and replace the shift knob on a BMW 3 Series E90 by following these simple steps. First, get ins…
How to remove the gear knob of the BMW Series 3 E90.
How to remove the gear knob of the BMW Series 3 E90.
BMW Serie 3 (2005-2013 / E91, E90, E92) To discover how to quickly and safely remove the gear knob inside your BMW 3 Series E90, simply read the following guide and follow the steps provide…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos