Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Timing the Engine of the BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Checks and maintenance

Today's tutorial will show you the main instructions needed to time the engine of the BMW 1 Series. First, remove the entire engine block to replace the timing chain; then perform the timing with the engine on the bench. Take the references found on the pulleys and the engine block; then install and perfectly adjust the chain as outlined in the manufacturer's manual. Finally, reassemble the engine block onto the body, following the video tutorial to the end!

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Chain on a BMW 1 Series 1.6
Guide to Replacing the Timing Chain on a BMW 1 Series 1.6
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Today's instructions will show you how to remove and replace the timing chain on a BMW 1 Series 1.6, engine code N13 B16A. First, open the bonnet of …
Replacing the Timing Chain on the BMW 1 Series 118i
Replacing the Timing Chain on the BMW 1 Series 118i
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Below are the main instructions for removing and replacing the timing chain on the BMW 1 Series 118i. First, open the bonnet of your car and start by…
Replacing the Electric Power Steering Motor on the BMW 1 Series
Replacing the Electric Power Steering Motor on the BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) The instructions in this guide will show you how to remove and replace the electric power steering motor on the BMW 1 Series. First, raise the vehicl…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 1 2011-2019 - What is the cost for a BMW 1 Series MOT? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos