Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Chain on a BMW 1 Series 1.6

Model: BMW Serie 1 F21, MK 2, F20 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

Today's instructions will show you how to remove and replace the timing chain on a BMW 1 Series 1.6, engine code N13 B16A. First, open the bonnet of the vehicle and start removing the cylinder head cover by unscrewing the fastening bolts and disconnecting the various wiring; then lift the vehicle and remove the lower plastic panels.

At this point, disconnect the serpentine belt and remove the side cover of the timing chain by disconnecting the pulleys and thus removing the timing chain; replace it with the new original one and perform the correct timing of the engine.


Posted on 25 June 2026 by ScegliAuto


Related tutorials

Replacement of the timing chain of the BMW 1 Series.
Replacement of the timing chain of the BMW 1 Series.
BMW Serie 1 (2011-2019 / F21, MK 2, F20) The instructions provided in this guide will allow us to disassemble and replace the timing chain of the BMW 1 Series with N13 engine. First, we open…
Replacing the Timing Chain on the BMW 1 Series 118i
Replacing the Timing Chain on the BMW 1 Series 118i
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Below are the main instructions for removing and replacing the timing chain on the BMW 1 Series 118i. First, open the bonnet of your car and start by…
How to Recognise the Noise of the Timing Chain on a BMW 1 Series 120D N47
How to Recognise the Noise of the Timing Chain on a BMW 1 Series 120D N47
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this short video, you will understand how and when to notice the noise of the timing chain on the first generation BMW 1 Series, particularly on t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos