Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Removal Instructions

Model: BMW Serie 7 MK 2, MK 3, E32, E38 - Years 1986-1994
Part: Front bumper

To remove the front bumper, start by removing the license plate bracket. Next, pull out the plastic clips that secure the rubber portion located at the license plate area. Continue by detaching the rubber trim that covers the bumper itself. To access one of the bumper's mounting pins, you need to remove the front turn signal. Then, remove the mounting pins to complete the bumper removal, taking care not to damage the wiring and the plastic reflectors attached to the trim.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38) To easily remove the front bumper, it is certainly helpful to lift the vehicle on suitable jack stands (or a lift), remove the front wheels and then …
Instructions for Removing the Front Fender
Instructions for Removing the Front Fender
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38) To remove the front fender, first remove the hood (the hood hinge support bracket is located on the edge of the fender) and the bumper (one of the mo…
Instructions for Removing the Rear Bumper
Instructions for Removing the Rear Bumper
BMW Serie 7 (1994-2001 / MK 3, E38) To remove the rear bumper, first remove the taillights: then take off the trim located under the lower edge of the lights (it is secured with pressur…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos