Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Bumper on BMW 7 Series

Model: BMW Serie 7 F02, MK 5, F01 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Front bumper

See other generations:
Video tutorial

With the key removed and the parking brake engaged, lift the hood. Remove the rubber seal near the bumper by hand, which extends along the side of the hood.

As shown in the video, use a special pliers to remove the retaining clips for the side panel and take it off. Unscrew all the screws located above the bumper, then access the wheel wells and remove the three 8 mm bolts on both sides. Finally, lift the car for better access and unscrew the 8 mm bolts securing the bumper from underneath.

Remove the bumper by detaching it gradually from the rest of the body.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Speakers of the BMW 7 Series
How to Remove the Interior Speakers of the BMW 7 Series
BMW Serie 7 (2001-2008 / E68, MK 4, E65, E67, E66) In this guide, you will find instructions to remove and replace the speakers located under the seat of the BMW 7 Series. First, get inside the vehicl…
Front Bumper Removal Instructions
Front Bumper Removal Instructions
BMW Serie 7 (1986-1994 / MK 2, E32, MK 3, E38) To remove the front bumper, start by removing the license plate bracket. Next, pull out the plastic clips that secure the rubber portion located at t…
Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
BMW Serie 7 (1986-1994 / MK 2, E32, MK 3, E38) To easily remove the front bumper, it is certainly helpful to lift the vehicle on suitable jack stands (or a lift), remove the front wheels and then …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos