Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Bumper

Model: BMW Serie 7 MK 2, MK 3, E32, E38 - Years 1986-1994
Part: Front bumper

To easily remove the front bumper, it is certainly helpful to lift the vehicle on suitable jack stands (or a lift), remove the front wheels and then the headlights; at this point, proceed to remove the pins along the edges of the wheel wells and along the lower edge of the bumper itself (there are two fairly long pins inside the air intake grilles); finally, disconnect the fog light connectors and then pull the bumper forward while applying a rotational movement from top to bottom to complete the removal. If necessary, disassemble the internal elements of the bumper itself.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Front Bumper Removal Instructions
Front Bumper Removal Instructions
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38) To remove the front bumper, start by removing the license plate bracket. Next, pull out the plastic clips that secure the rubber portion located at t…
Instructions for Removing the Rear Bumper
Instructions for Removing the Rear Bumper
BMW Serie 7 (1994-2001 / MK 3, E38) To remove the rear bumper, first remove the taillights: then take off the trim located under the lower edge of the lights (it is secured with pressur…
Instructions for Removing the Front Fender
Instructions for Removing the Front Fender
BMW Serie 7 (1986-1994 / MK 2, MK 3, E32, E38) To remove the front fender, first remove the hood (the hood hinge support bracket is located on the edge of the fender) and the bumper (one of the mo…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos