Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 7
    4. : Center console disassembly instructions

BMW Serie 7 - Video tutorial

Model: BMW Serie 7 MK 3, E38 - Years 1994-2001
Part: Accessory Kit
Operation: Center console disassembly instructions

In order to disassemble the elements that make up the center console, including the bottle support support located at the very bottom, you must first remove the central molding of the dashboard (in this case it is a briar insert); after which it is possible to move on to the disassembly of all the components of the center console starting from the one furthest to the side, immediately under the ventilation vents, and then cascading downwards: it is a question of unhooking the interlocking tabs and pulling forward disconnecting the relative power sockets of the various systems (air conditioning, anti-skid, etc.).


Posted on 8 August 2023 by ScegliAuto



Disassembly of the navigator monitor console
BMW Serie 7 (1994-2001 / MK 3, E38) In order to disassemble the center console which includes the navigator monitor, it is necessary to start by removing the briar moldings in the cente
Disassembly of the front air vents
BMW Serie 7 (1994-2001 / MK 3, E38) In order to remove the front air vents, those placed in the center of the console, which also integrate a fan inside them, it will be necessary to re
Starter button replacement
BMW Serie 7 (2001-2008 / MK 4, E68, E65, E67, E66) The replacement of the engine start button (next to which there is also the key seat) requires the disassembly of all the elements present in the cen

Other guides that may interest you

    Frequently Asked Questions

    • Serie 7 2001-2008 - Where is the phone sim in the BMW 7 series? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos