Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD2 Port on the BMW 7 Series G12

Model: BMW Serie 7 MK 6, G11, G12 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Dashboard

See other generations:
Video tutorial

To locate the OBD2 port in your BMW 7 Series G12 (2015-2022), it only takes a few seconds. Follow these steps.

First, get into the car and reach the driver's seat. Make sure the instrument cluster is off, then focus on the lower left side of the dashboard, near the clutch pedal.

Locate the OBD2 port you were looking for, and you're done. If you want to connect a diagnostic device to it, just use a compatible cable.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a BMW 7 Series
How to Reset the Service Light on a BMW 7 Series
BMW Serie 7 (2015-2022 / MK 6, G11, G12) Resetting the service light on a BMW 7 Series vehicle, model G11 and G12, is a very simple and quick task that you can do yourself, especially with o…
How to Reset the Tire Pressure Light on the BMW 7 Series MK6
How to Reset the Tire Pressure Light on the BMW 7 Series MK6
BMW Serie 7 (2015-2022 / MK 6, G11, G12) Let's see the procedure to reset the tire light on the BMW 7 Series MK6 (G11/G12). The entire procedure is managed by the iDrive system (there are no…
How to Replace the Fuel Door on a BMW 7 Series?
How to Replace the Fuel Door on a BMW 7 Series?
BMW Serie 7 (2015-2022 / MK 6, G11, G12) To replace the fuel door on a BMW 7 Series, first completely unscrew the cap after opening the fuel door. Once the cap is open, pry at the bottom of …

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos