Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Clutch

Model: BMW Serie 7 MK 3, E38 - Years 1994-2001
Part: Clutch

The clutch's job is to disconnect the engine from the transmission to allow for gear changes. When it wears out, it needs to be replaced, and you can do it yourself without specialized help, saving some money. It is not an overly complicated operation. The clutch kit consists of the disc, pressure plate, and release bearing. To disassemble the clutch and reach your goal quickly, you often need to remove the transmission as well. After that, remove the front wheels and disconnect the shock absorbers, carefully removing the pins and related bolts from the hub carrier. Then, detach the lower control arm ball joint and the steering box ball joint. Next, remove the starter motor. At this point, remove the half shafts and disconnect the shift lever, finishing with the removal of the clutch cable.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Automotive Bushings
Replacing Automotive Bushings
BMW Serie 7 (1994-2001 / MK 3, E38) If the bushings on your vehicle are worn, they need to be replaced, along with the control arms, suspensions, shock absorbers, sway bar links, etc. Y…
Replacing Car Seats
Replacing Car Seats
BMW Serie 7 (1994-2001 / MK 3, E38) If you have some manual skills and want to save some money, this guide explains how to replace car seats simply. Before replacing the seats in a car,…
Replacing Car Airbag
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) The following guide shows how to replace the airbag. First, gather the necessary tools and screwdriver to proceed with the operation. The first step …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos