Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Fender

Model: BMW Serie 7 MK 2, E32, MK 3, E38 - Years: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
Part: Body

See other generations:
Video tutorial

To remove the front fender, first remove the hood (the hood hinge support bracket is located on the edge of the fender) and the bumper (one of the mounting pins is located right behind the turn signal). Once the hood and bumper are removed, unscrew the pins along the hood closing edge, remove the push clips inside the front door pillar, take off the plastic trim clip on the lower edge of the fender, and unscrew the underlying bolt.

Finally, remove the plastic cover under the floor pan and unscrew the last two fender mounting pins.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing Front Turn Signal
Instructions for Removing Front Turn Signal
BMW Serie 7 (1986-1994 / MK 2, E32, MK 3, E38) As with all older cars, removing the front turn signal is quick and intuitive. You don’t need to disassemble anything else besides the headlamp itsel…
Front Bumper Removal Instructions
Front Bumper Removal Instructions
BMW Serie 7 (1986-1994 / MK 2, E32, MK 3, E38) To remove the front bumper, start by removing the license plate bracket. Next, pull out the plastic clips that secure the rubber portion located at t…
Ignition Coil Removal Instructions
Ignition Coil Removal Instructions
BMW Serie 7 (1994-2001 / E38, MK 3) The ignition coils are integrated with the spark plug boots. To remove them, first take off the plastic cover on top of the engine (just press on the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos