Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Hood Lock

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Body

The front hood of the car model in question is equipped with two locking mechanisms located at the front of the grille. To begin the removal process, disconnect the release cable: along the edge of the left front fender, at the location of the engine oil filter, there is a plastic housing where the lock cables connect to the release lever. Disconnect the two cables and proceed to remove the grille covering by removing the push fasteners and the corresponding mounting pins. At this point, you can free the lock cables and unscrew the mounting pins of the locks themselves to complete the removal.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembling the Glove Box Lock
Disassembling the Glove Box Lock
BMW Serie 5 (1995-2003 / E39) If the lock of the glove box door tends to jam, it is essential to disassemble it before it gets stuck, making it impossible to open (unless you brea…
Front Hood Release Cable Replacement
Front Hood Release Cable Replacement
BMW Serie 5 (1995-2003 / E39) The front hood release cable runs from the release lever, located near the driver’s side kick panel, to the hood latch; this cable is divided into tw…
Door Lock Disassembly Instructions
Door Lock Disassembly Instructions
BMW Serie 5 (1995-2003 / E39) Disassembling the door lock is not particularly complex but requires a lot of patience since you need to remove several components before completing …

Other guides you may be interested in

How to Replace a Headlight Bulb on a Ford Focus

How do you replace a rear headlight bulb on a Ford Focus? Let's see how to do it in this video. This operation is very simple to carry out. Open the boot and remove the plastic cover from the side trim. Unscrew the retaining screws of the lamp unit, then pull it out by hand from the car's bodywork. Disconnect the power connectors, taking care not to damage them. Once the rear light is removed, replace the damaged bulbs. After completing this operation, reassemble everything in reverse order. Finally, check that the lights are functioning correctly.

Watch the video!


by ScegliAuto

More videos