Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change and Filter Replacement

Model: BMW Serie 5 E34 - Years 1988-1995
Part: Oil filter

If you own a BMW 5 Series, you can change the oil and replace the filter without going to a mechanic. Loosen and unscrew the bolt that serves as the drain plug for the oil pan located under the vehicle. Collect the oil in a disposal container. Clean the plug and reinstall it as before. Using a small hex wrench, unscrew the pin that secures the filter cap and remove the old filter; compare it with the new one. Replace the three worn rubber seals with new ones (included with the new filter). To assist with this replacement, use a metal hook. Lubricate the new seals with a bit of oil. Position the filter and its cap as before. Now remove the cap on the plastic cover that protects the engine. Place a funnel and fill the pan with new oil, checking the level with the dipstick.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Automatic Transmission Oil Cooler Replacement
Automatic Transmission Oil Cooler Replacement
BMW Serie 5 (1995-2003 / E39) The repair described in the video refers to the replacement of the automatic transmission oil cooler: the oil temperature is very important to ensure…
Guide to Replacing the Fuel Filter on the BMW 5 Series 520D
Guide to Replacing the Fuel Filter on the BMW 5 Series 520D
BMW Serie 5 (2010-2017 / F11, F10) This guide provides instructions to remove and replace the fuel filter on the BMW 5 Series 520D. First, raise the vehicle to locate and access the fu…
Instructions for Replacing the Fuel Filter
Instructions for Replacing the Fuel Filter
BMW Serie 5 (1988-1995 / E34) The fuel filter is located underneath the vehicle's floor; therefore, unscrew the clamps securing the fuel inlet and outlet hoses and slide them off.…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos