Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the antenna in the BMW Z3?

Model: BMW Z3 MK 1 - Years 1995-2002
Part: Antenna

In this tutorial, we can see how to replace the antenna in a BMW Z3, an extremely simple and fast operation. First of all, make sure the key is not inserted, then open the trunk door, unscrew the indicated screw, and remove the plastic rivet, both located on the left side wall. Then, separate the cover, remove the fixing bracket bolt with a 7mm wrench, and unscrew the antenna. At this point, all that's left is to separate the internal block, position the replacement, and assemble it following the exact reverse procedure.

Posted on 7 June 2023 by ScegliAuto

Video tutorial

Related tutorials

Removal and Dismantling of the Car Radio
Removal and Dismantling of the Car Radio
BMW Z3 (1995-2002 / MK 1) To remove the car radio from this vehicle, you need a suitable small screwdriver. Locate the two screws at either end of the radio that need to be re…
How to Replace the Bulbs on BMW Z3
How to Replace the Bulbs on BMW Z3
BMW Z3 (1995-2002 / MK 1) Are the rear lights of your BMW Z3 not working anymore? Watch this video to learn how to replace the bulbs: Open the boot lid, remove the plastic pan…
How do you remove the rear cover of the speedometer from the BMW Z3?
How do you remove the rear cover of the speedometer from the BMW Z3?
BMW Z3 (1995-2002 / MK 1) In order to replace the rear cover of the BMW Z3, you must first remove the speedometer from inside its housing, unscrewing the special screws and di…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos