|
Do it yourself
| |||
| ||||
How to install a BMW steering wheel cover.
Model: BMW Serie 1
F21, F20, MK 2
- Years 2011-2019
In this video, we see how to install the steering wheel cover on a BMW 1 Series, but the process is the same for all types of BMWs. In this case, the kit was purchased on AliExpress with the code 1005001265299770 for the price of 21.67 euros, with free shipping. The kit includes the steering wheel cover, thread for sewing it, two needles, a spatula for finishing touches, and double-sided adhesive (if necessary). The steering wheel cover has a specific direction, and we cannot install it however we want, otherwise the result will not be satisfactory. After taking the necessary measurements, we begin sewing it, using the pre-made stitches. We start by following the advice of our YouTuber for the first stitch and the initial knot, which should be positioned to join the existing stitch invisibly. The entire sewing process will take at least two hours. Then, using the spatula, tuck the excess leather on the sides of the grip (which obviously cannot be sewn). If necessary, apply a small amount of double-sided adhesive. Job done.
Posted on 1 August 2023 by ScegliAuto
This video is currently unavailable
Related tutorials
BMW Serie 1
(2011-2019 /
F21, F20, MK 2)
The steps for removing the airbag of a BMW 1 Series car are the same for all BMW models. The steps to be followed are: -disconnect the car battery to…
BMW Serie 1
(2011-2019 /
F21, F20, MK 2)
To be able to remove the steering wheel of the BMW 1 Series, you must first remove the front airbag which is positioned right on the steering wheel. …
BMW Serie 1
(2011-2019 /
F21, F20, MK 2)
To completely make the Service light disappear from the instrument cluster of the BMW Series 1, you need to turn on the instrument cluster and wait f…
Other guides you may be interested in
|
How to Remove the Fuel Filter on Opel Corsa
Here's how to remove and replace the fuel filter on an Opel Corsa: Lift the car on a column lift or jack and locate the fuel filter as shown in the video. Using a socket or spanner, unscrew the securing bolts of the round plate around the filter (disconnect the wires and various hoses from the filter) and remove it from under the body. Once the filter is removed, take it out of the vehicle (replace it with a new filter). Finally, reattach the fuel filter (connect the hoses and wires) and tighten the appropriate bolts. Close the front bonnet. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.088
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |