Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Brake Fluid Reservoir Located on a BMW X1?

Model: BMW X1 F48 - Years 2015-2022
Part: Brake fluid

In this video, we will see where the brake fluid reservoir is located on a BMW X1. Unfortunately, it is in a very awkward position. You need to open the hood, and on the driver's side, you can see - partially hidden by the mechanical parts of the hood - the cap of the reservoir, which is actually even lower than your line of sight. There is a white label above it, and next to it, there is a bar labeled "042" which is the brake booster depressor, where the diaphragm is contained. You can see the fluid level from a distance, and you can top it off, although with some difficulty.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Brake Fluid Warning Light on a BMW X1
How to Reset the Brake Fluid Warning Light on a BMW X1
BMW X1 (2015-2022 / F48) In this video, you will learn how to reset the brake fluid warning light on a BMW X1 F48 after replacing the fluid. Using the mouse on the center con…
Where is the brake fluid reservoir located in the 2018 BMW X1?
Where is the brake fluid reservoir located in the 2018 BMW X1?
BMW X1 (2015-2022 / F48) The brake fluid reservoir of the 2018 BMW X1 is located inside the engine compartment. To view the reservoir, you need to first remove the rubber gas…
How do you access the brake fluid reservoir on a BMW X1 E84?
How do you access the brake fluid reservoir on a BMW X1 E84?
BMW X1 (2009-2015 / E84) In this video we can see how to find the brake fluid reservoir inside the engine compartment of a BMW X1 E84 version. It is located on the left side …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos