Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Oil Filter

Model: BMW Serie 7 MK 3, E38 - Years 1994-2001
Part: Oil filter

Put the car on the lift. Open the hood and locate the engine oil reservoir. Remove the cap from the reservoir. Locate the oil filter housing and, using the appropriate wrench, unscrew the cover. Pull the old filter out of its slot. Now lift the car using the lift and find the drain plug to let the old oil flow out. Place a drain pan under the engine and unscrew the bolt to drain the oil. Once finished, screw the bolt back in and lower the car. Now replace the gasket on the filter housing and insert the new filter into its housing. Reattach the housing to its position on the engine. At this point, pour the new oil into the reservoir. The car that underwent this maintenance is a BMW 7 Series.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) Changing the engine oil and its filter is typical DIY maintenance, but be sure to dispose of the used oil at a proper collection center; slightly lif…
How to Reset the Oil Light on BMW 7 Series F01
How to Reset the Oil Light on BMW 7 Series F01
BMW Serie 7 (2008-2015 / F01, MK 5, F02) In this mini guide, discover how to reset the engine oil light on your BMW 7 Series F01. This is a simple operation that you can easily complete by f…
How to Reset and Reprogram Engine Oil Life Interval
How to Reset and Reprogram Engine Oil Life Interval
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) First, turn on the car's ignition. Press the onboard computer power button. Press and hold the button at the top left of the dashboard until the serv…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos