Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the BMW X5 35D

Model: BMW X5 E70 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Oil filter

See other generations:
Video tutorial

In this guide we will see step by step instructions on how to perform the regular maintenance oil change of the BMW X5 35D engine. First of all, lift the car and unscrew the oil drain plug found under the engine, letting the oil drain into a container for about ten minutes; then we remove the oil filter, using the appropriate wrench to unscrew the cartridge, as shown in the video.

At this point, install the new oil filter, screwing by hand and tightening gently, finally topping up with the new engine oil!


Posted on 22 December 2024 by ScegliAuto


Related tutorials

Oil and Filter Change on BMW X5 E53
Oil and Filter Change on BMW X5 E53
BMW X5 (1999-2006 / E53) Let's see how to change the oil and filter on a BMW E53: You will need a 36 mm socket wrench to open the filter cap and remove it. Place it in a cont…
Oil and Filter Removal on BMW X5
Oil and Filter Removal on BMW X5
BMW X5 (2007-2013 / E70) Perform the oil and filter change on a BMW X5. Position your car on a column lift and raise it to a comfortable height for access. To change the oil,…
How to Replace the Cabin Filter in a BMW X5?
How to Replace the Cabin Filter in a BMW X5?
BMW X5 (2019-2026 / G05, G18) In this tutorial, you will see how to replace the cabin filter in a BMW X5, a very simple and quick operation. First, go to the passenger side, then …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos