Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. X5
  6. : Oil change and filter replacement on BMW X5 version E53.

BMW X5 - Video tutorial

Model: BMW X5 E53 - Years 1999-2006
Part: Engine oil
Operation: Oil change and filter replacement on BMW X5 version E53.

Let's see how to change the oil and filter on a BMW E53 version: We will need a 36 mm socket wrench to open the filter cap and remove it. We will immediately place it in a container to dispose of it along with the engine oil; separate it from the cap and gasket (we will put a new one on the cap), then insert the new filter and immediately place it back in its position, closing it with the 36 mm wrench. Now we lift the car, and with a 17 mm socket wrench, we open the drain plug to let all the oil flow into a container, which we will dispose of along with the filter. Now it's time to top up the oil from the top cap: 6 liters of SAE 5W30. Now we can close the cap and the operation is finished.


Posted on 15 October 2023 by ScegliAuto

    Frequently Asked Questions

    • X5 1999-2006 - How many liters of engine oil does the 2006 BMW X5 contain? Read Answer
    • X5 1999-2006 - How much does it cost to replace the engine oil on the BMW X5? Read Answer
    • X5 1999-2006 - Location of engine oil drain plug BMW X5 E53? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos