Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Bulbs in a BMW 3 Series F30-F31

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Headlight bulb

In this video tutorial, you can see how to install LED bulbs in a BMW 3 Series F30-F31 by following some simple steps: First, purchase LED bulbs from an authorized auto parts dealer. Next, get in the vehicle, turn off the car, and pull the handbrake. Lift the hood and secure it with the prop rod. Remove the cap, which is the same as the high beams. At this point, remove the bulb by reaching inside the hole and pulling out the lower bulb (simply pull the bulb outward). Avoid touching the bulb when it's hot (it's best to wear gloves). Remove the bulb by pulling it outward. Install the new LED bulb and reassemble everything in reverse order, as shown in the video.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on BMW 3 Series F30 - F31
Replacing Front Headlight Bulb on BMW 3 Series F30 - F31
BMW Serie 3 (2012-2019 / F30, F31) In today's video, you will see how to remove and replace the front headlight bulb on a BMW 3 Series F30 and F31. First, open the hood and remove the …
Remove Headlight Bulbs on BMW 3 Series F30
Remove Headlight Bulbs on BMW 3 Series F30
BMW Serie 3 (2012-2019 / F30, F31) Remove the front headlight bulbs? Let's see how to remove the front headlight bulbs on the BMW 3 Series. Turn the front wheel inward, locate the cove…
Replacing Headlight Bulb on BMW 3 Series F30 - F31
Replacing Headlight Bulb on BMW 3 Series F30 - F31
BMW Serie 3 (2012-2019 / F30, F31) In today's tutorial video, you will learn how to remove and replace the low beam and high beam bulbs in the front headlight of a BMW 3 Series F30 and…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos