Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Bleed the Power Steering Pump

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Steering wheel

A properly functioning power steering system can make the difference between having an accident or not. Power steering provides an advantage when it comes to making quick steering movements because the hydraulic pressure in these systems makes it almost effortless to control the vehicle. However, when air enters the power steering line, it can make handling really difficult. A noise usually indicates that the system contains air and needs to be bled. Remove the cap from the power steering reservoir and check the fluid level, then place a plastic container under the bleed valve, and slowly open the valve so that the power steering system can vent.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Power Steering Reservoir Cap Seal
Replacing the Power Steering Reservoir Cap Seal
BMW Serie 5 (1995-2003 / E39) If you notice oil leaks around the power steering reservoir cap, the underlying seal may be damaged: it is an o-ring made of rubber that, due to the …
How to Replace Power Steering Fluid in BMW 5 Series
How to Replace Power Steering Fluid in BMW 5 Series
BMW Serie 5 (1995-2003 / E39) The heaviness of the power steering is more of a characteristic than a defect of BMWs; if you drive a BMW for the first time, you will immediately no…
How to disassemble the fuel pump of the BMW 5 Series
How to disassemble the fuel pump of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Today's main information will show us how to disassemble and replace the low-pressure fuel pump of the BMW 5 Series. First, we open the rear doors an…

Other guides you may be interested in

How to Replace the Thermostat on a Fiat Punto 2 Series 8v

When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly under the ignition coils. To facilitate the replacement, disconnect the intake duct hose and remove the coil pack. At this point, disconnect the connector from the thermostat and proceed to remove the corresponding fixing pins to replace it with the new one, ensuring to use a new gasket.

Watch the video!


by ScegliAuto

More videos