Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Your Car's Shocks

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Shocks

Shocks are very important for the operation of your car. These components wear out over time and need to be replaced. Doing it yourself can save you some money. At first, it may seem like a daunting task, but with a bit of patience, you can easily perform it. You need to lift the car with a jack and loosen the bolts using the appropriate wrenches. After the upper bolt is removed, you must also disconnect the brake line. It is connected to the shock with wires that can be easily removed. The new ones should be installed using the same procedure.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb
How to Replace the Front Headlight Bulb
BMW Serie 3 (1998-2006 / E46) Anyone has experienced a burned-out headlight bulb in their car. You can change it without needing the help of a specialist. This task requires atten…
Front Shock Absorber Replacement Instructions
Front Shock Absorber Replacement Instructions
BMW Serie 3 (1998-2006 / E46) To replace the shock absorbers, first obtain the appropriate clamps to compress the spring attached to the shock. Remove the old shock absorber from …
Replacing Car Shock Absorbers
Replacing Car Shock Absorbers
BMW Serie 3 (2005-2013 / E92, E90, E91) If your car has traveled more than 62,137 mi, you should replace the shock absorbers. They help absorb the vehicle's bumps. This guide shows you how …

How to Remove the Door Panel on Nissan Micra

How do you remove the door panel (right side) on a Nissan Micra? Use a lever or screwdriver to pry at the handle on the door panel, detach it, and disconnect the terminals of the window switch (manual crank). Use a fixed screwdriver to unscrew the screws on the panel, then use a plastic lever to unclip all the clips around the perimeter of the door. Finally, pull away the panel with your hands, disconnecting the opening lever cable, the window lifter terminals, and the speakers. Reassemble everything by reversing the steps.

Watch the video!


by ScegliAuto

More videos