Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster Bulb on a BMW 5 Series?

Model: BMW Serie 5 E34 - Years 1988-1995
Part: Light bulb

To replace the instrument cluster bulb on a BMW 5 Series, remove the screws located at the top of the instrument cluster. Once these screws are loosened, you can pull the cluster out of its housing to disconnect the connectors at the back. At this point, detach the cover on the back of the instrument cluster to extract the bulbs inside and replace them with new ones. After replacing, reassemble everything.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulb in a BMW 5 Series?
How to Replace the Interior Light Bulb in a BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) To replace the interior light bulb in a BMW 5 Series, use a tool to pry off the overhead light fixture located in the front center of the vehicle's c…
How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…
Replacing the Headlight Bulb on the BMW 5 Series
Replacing the Headlight Bulb on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, we will see the instructions on how to remove and replace the low beam bulb of the headlight on the BMW 5 Series. First, open the hood of your…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos