Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
E91, E90, E92
- Years 2005-2013 In this video tutorial, we will see how to disassemble and replace the cabin fan resistor of the BMW 3 Series. First, we get into the car on the passenger side and start by removing the glove compartment, unscrewing the fixing screws. Then, we unplug the electrical connector of the fan and release the two plastic tabs to rotate and remove the cabin fan, as shown in the video. At this point, we disconnect the fan resistor and replace it with the new one. We then reassemble the cabin fan and finally the glove compartment!
Posted on 21 October 2023 by ScegliAuto
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |