Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fan Resistor on BMW 3

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Blower motor

Is the air fan not working anymore? Let's see how to remove the fan resistor on a BMW 3. Use a pry tool to remove the plastic cover under the dashboard. Use a screwdriver to unscrew the cover (where the resistor is located). Disconnect the power connector, then remove the resistor from the cabin. Install a new fan resistor (connect the power connector). Reinstall the cover and tighten the screws. Check that all parts are correctly installed and test the fan's operation. Remove the fan if it does not work.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Blower Motor Resistor on 3 Series
Replacing the Blower Motor Resistor on 3 Series
BMW Serie 3 (1998-2006 / E46) Want to remove the blower motor resistor on a BMW 3 Series? Let's look at disassembling the components inside the front dashboard. Open the cover of …
How to Replace the Cabin Fan Resistor on a BMW 3 Series
How to Replace the Cabin Fan Resistor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the steps to remove the cabin fan resistor on a BMW 3 Series. First, get inside the vehicle and start by opening and re…
How to Replace the Cabin Fan Resistor on the BMW 3 Series
How to Replace the Cabin Fan Resistor on the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will see how to remove and replace the cabin fan resistor on the BMW 3 Series. First, get inside the vehicle on the passe…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos