Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Fan Resistor on a BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Blower motor

How do you replace the cabin fan resistor on a BMW 3 Series? Gather a screwdriver or a cordless drill: unscrew the fastening screws around the perimeter of the fan located in the dashboard (if you need to remove it along with the resistor). Once this is done, disconnect the various power connectors, remove the fan regulator from its housing, and insert the new part into its place. Finally, reinstall all the components removed from the dashboard as you took them out. Check the fan's proper functioning.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the steps to remove the cabin fan resistor on a BMW 3 Series. First, get inside the vehicle and start by opening and re…
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will see how to remove and replace the cabin fan resistor on the BMW 3 Series. First, get inside the vehicle on the passe…
BMW Serie 3 (1998-2006 / E46) To access the resistor that controls the speed of the cabin fan, you need to remove several components (plastic covers, panels, ...) located on the p…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos