Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing the Front Driver's Seat

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Seat

Removing the driver's front seat is very simple. Start by sliding the seat all the way forward to access the rear mounting bolts on the seat tracks to the vehicle floor. With the seat in this position, remove the plastic cap on the side that covers the seatbelt mounting to disconnect it. Next, slide the seat all the way back to access the front mounting bolts, remove them, and lift the seat to disconnect the connectors underneath, completing the removal from the cabin.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) The subwoofer is a speaker dedicated to reproducing low-frequency sounds and is used to enhance the extension of low frequencies, along with speakers…
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, see how to remove the driver's seat in a BMW 3 Series, a very simple and quick operation. First, disconnect the negative terminal o…
BMW Serie 3 (2005-2013 / E91, E90, E92) To remove the radio in this vehicle, follow the simple instructions in this video tutorial and refer to the description below. First, sit in the driv…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos