|
Do it yourself
| |||
| ||||
How to Open a Stuck Trunk in the BMW 3 Series?
Model: BMW Serie 3
E92, E90, E91
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In the BMW 3 Series, it can happen that the trunk gets stuck, for example, due to a failure of the lock actuator or the related release button. In these cases, it is still possible to perform an emergency opening by following the simple procedure shown in this tutorial. First, open the left rear door, then lower the backrest of the seat by operating the corresponding lever. Next, go inside the trunk, remove the cover of the panel, and pull the indicated cord towards you to unlock the latch.
Updated on 2 September 2026 by ScegliAuto
Related tutorials
BMW Serie 3
(2005-2013 /
E92, E90, E91)
To unlock the rear hatch of the BMW 3 Series when it's locked, there are two options: the first is to pull the key from the top of the remote and ins…
BMW Serie 3
(2012-2019 /
F31, F30)
If the trunk of your BMW 3 Series is stuck from the inside, don’t panic. On the F30 and F31 models, you can open the rear trunk in an emergency witho…
BMW Serie 3
(2005-2013 /
E92, E90, E91)
If the battery of the BMW 3 series is discharged, we must be able to open the rear hatch to access the old battery in order to replace it, which will…
Other guides you may be interested in |
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |