Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the temperature sensor on the BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Engine coolant temperature sensor

Here is a brief procedure for removing and replacing the coolant temperature sensor on the BMW 1 Series. First, open the bonnet and start by removing the plastic cover above the engine block; then locate the temperature sensor, which is found low near the right intake hose, as shown in the video. Now disconnect the electrical connector and unscrew the temperature sensor, replacing it with the new original one; reconnect the electrical connection and secure the sensor properly, monitoring the engine temperature.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the MAF sensor of the BMW 1 Series
Replacement of the MAF sensor of the BMW 1 Series
BMW Serie 1 (2019-2026 / MK 3, F40) To replace the sensor of the BMW 1 series, we open the hood of the engine compartment, locate the sensor positioned on the pipe coming out of the air…
How to check the engine oil and coolant temperature on the BMW 1 Series F20/21
How to check the engine oil and coolant temperature on the BMW 1 Series F20/21
BMW Serie 1 (2011-2019 / MK 2, F20, F21) On the BM1 Series 1 version F20/21, there is no possibility to see the oil and coolant temperature directly. However, there is the possibility to acc…
How to Open the Bonnet of a BMW 1 Series
How to Open the Bonnet of a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you start, sit in the driver's seat of your BMW 1 Series. Begin by pulling the bonnet release lever located at the bottom right of the driver'…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos