Do it yourself
Frequently asked questions about cars and motorcycles

How to Use the Automatic Gearbox of a BMW

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Transmission

In this video, learn how to use the automatic gearbox of a BMW 1 Series. Here, R stands for reverse, N for neutral, D for Drive, which is the normal gear, and P stands for parking. M/S is used for manual driving. To switch between positions, press the button on the left side (unlock), keep your right foot on the brake, and the indicator light will turn on. To park, keep your foot on the brake and press the "P" button located above the lever. Start the engine, ensure you are in "P", and with unlock, shift to "D", release the handbrake, and drive off. If you select "R", release the brake and reverse. For manual driving, shift to "D" and move the lever to the left. The light will turn on for "M/S", and pull it towards you to change gears (the gear number will appear on the display). To downshift, push it. To stop, press "P" for parking while keeping your foot on the brake.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 1 (2011-2019 / MK 2, F20, F21) In today's tutorial, you will learn how to reset the automatic gearbox on a BMW 1 Series F20, second generation. First, get inside the car and turn o…
BMW Serie 1 (2011-2019 / MK 2, F20, F21) The steps for removing the airbag of a BMW 1 Series car are the same for all BMW models. The steps to be followed are: -disconnect the car battery to…
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To remove the door panel of a BMW 1 Series, start by removing the trim around the inner handle. Find and remove screws or bolts, then gently pry off …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos