Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driver's Seat in a BMW 5 Series?

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Seat

In this tutorial, you will see how to remove the driver's seat in a BMW 5 Series, a very simple task. First, raise the seat completely using the appropriate control. Then, locate the two indicated screws and remove them with a T30 Torx wrench. Next, move the seat back, remove the two front bolts from the brackets with a T50 Torx wrench, and repeat the process on the rear side. At this point, simply release the two indicated clips, disconnect the large yellow connector, and pull the seat out of the cabin. To install the replacement, just follow the reverse procedure.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat of the BMW 5 Series
How to Remove the Front Seat of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) In this video tutorial, you will see step-by-step instructions on how to remove and replace the front seat of the BMW 5 Series. First, open the drive…
Removing the Front Seat of the BMW 5 Series
Removing the Front Seat of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Follow these main instructions to remove and replace the front seat of the BMW 5 Series. First, open the front door and start unscrewing all the moun…
How to Remove the Front Passenger Seat from a BMW 5 Series
How to Remove the Front Passenger Seat from a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Before you start, open the front passenger door of your BMW 5 Series. First, fully slide back the seat track covers. Next, remove the bolts that secu…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos