Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Clock

See other generations:
Video tutorial

When driving, you may need to adjust the clock according to the time zone you are in. On a BMW 3 Series E46 model, this operation is quite simple. First, turn on the vehicle's instrument cluster.

Then, press and hold the left button on the instrument cluster for a few seconds. Press the button on the right side of the instrument cluster once and start adjusting the time.

Rotate the right knob and press to confirm. Once finished, you can turn off the instrument cluster and restart it to confirm the operation.

The adjusted time will also appear on the radio display.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Set the Clock on the BMW 3 Series Instrument Cluster
How to Set the Clock on the BMW 3 Series Instrument Cluster
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to set the clock on the instrument cluster of the BMW 3 Series model E46 by yourself. To set the clock, turn on the instrum…
How to Set the Clock on a BMW 3 Series E46?
How to Set the Clock on a BMW 3 Series E46?
BMW Serie 3 (1998-2006 / E46) To set the clock on the BMW 3 Series E46, the instrument cluster must be powered on. The engine can remain off. This older model does not come with a…
How do you set the clock on the BMW 3 Series?
How do you set the clock on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To set the clock of the BMW 3 Series, you need to insert the ignition key into the slot and turn it to turn on the instrument panel: once the panel i…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos