Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to change the headlight bulb of the BMW X3

BMW X3 - Video tutorial

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Headlight bulb
Operation: How to change the headlight bulb of the BMW X3

The replacement of the headlight bulb (H7 socket) on the passenger side is quite simple to carry out, but it is necessary to move the glass washer tank to have more room for maneuver to access the lamp holder seat; once the front hood has been opened, unscrew the reservoir fixing pin and move it to be able to release and remove the protective cap applied just behind the headlight; therefore, once the bulb seat has been intercepted, grasp the relative power socket and gently pull to extract the bulb from the lamp holder and proceed with the replacement.


Posted on 17 September 2023 by ScegliAuto



How to change the headlight bulb on a BMW X3 F25.
BMW X3 (2010-2017 / F25, MK 2) If you have searched for this video, probably one of the headlights of your BMW X3 needs to be replaced. In this video, we will discover how to repla
Bmw X3 headlight position / low beam bulb replacement
BMW X3 (2003-2010 / MK 1, E83) In this short video tutorial we will see the steps on how to remove and replace the headlight bulb, position light and low beam of a BMW X3 first ser
How to replace the rear light bulb on the BMW X3?
BMW X3 (2010-2017 / F25, MK 2) In order to replace the rear light bulb of the BMW X3, you have to open the tailgate so that you can have access to the side part of the correspondin

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos