Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 5
  6. : How to disassemble the steering angle sensor of the BMW 5 Series

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Operation: How to disassemble the steering angle sensor of the BMW 5 Series

Let's briefly see the steps that will allow us to disassemble and replace the steering angle sensor of the BMW 5 Series. First of all, we get on board the car and start disassembling and removing the driver's airbag; to do this, we release it from the back of the steering wheel, disconnecting the electrical connector, as shown in the video. At this point, we unscrew the central screw of the steering wheel to remove it as well; now we proceed with the disassembly of the steering angle sensor, disconnecting the various electrical connectors. We correctly install the new sensor and reassemble everything!


Posted on 17 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 5 2017-2024 - Read Answer
    • Serie 5 2010-2017 - What problems on the BMW 5 Series? Read Answer
    • Serie 5 2010-2017 - Where is the cigarette lighter fuse located in a BMW F10? Read Answer
    • Serie 5 2010-2017 - What are the most common BMW f11 problems? Read Answer
    • Serie 5 1995-2003 - Where are the fuses on a 2003 BMW 5 Series located? Read Answer
    • Serie 5 2017-2024 - How to know the meaning of the warning lights on a BMW 5 Series? Read Answer
    • Serie 5 2010-2017 - Where is the cigarette lighter fuse located on a BMW 5 series? Read Answer
    • Serie 5 2010-2017 - What problems does the BMW 520d F10 and f11 have? Read Answer
    • Serie 5 2010-2017 - What problems can the BMW f10 present? Read Answer
    • Serie 5 2003-2010 - What is the color code of a BMW 5 Series for? Read Answer
    • Serie 5 2003-2010 - How many horsepower does the BMW 530 year 2004 have? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos