Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part:

To reset the tire pressure monitoring system (TPMS) light on a BMW 5 Series, first check that the pressure of all tires is correct. Next, turn on the ignition or start the engine, and using the iDrive controller or the dedicated button, access the Vehicle Information menu and select the section related to tire pressure monitoring. Choose the initialization or reset function and confirm the operation. Then, drive at a constant speed for a few minutes: during this trip, the system will store the new reference values. Once the learning process is complete, the TPMS light will automatically turn off, indicating that the procedure has been successfully completed.

Posted on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on a BMW 5 Series
How to Reset the Tire Pressure Light on a BMW 5 Series
BMW Serie 5 (2017-2024 / G30) Here are the instructions on how to reset the tire pressure light on a BMW 5 Series. Before resetting the TPMS sensors, ensure all four tires are at …
How to reset the tire pressure warning light on the BMW 5 Series
How to reset the tire pressure warning light on the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) These short and simple steps will show us how to reset the tire pressure warning light (TPMS) of the BMW 5 Series; before performing the reset, it is…
How to reset the tire pressure warning light on the BMW 5 Series
How to reset the tire pressure warning light on the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) These simple and brief instructions will show us the process of resetting the tire pressure monitoring system (TPMS) light on the BMW 5 Series; befor…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos