Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear seats of the BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Seat

Today we will see the instructions for disassembling the rear seats and the rear bench of the BMW 3 Series. First of all, we open the rear doors and start disassembling and removing the rear bench by pulling it upwards; then we will lower the seat backs, using a socket wrench with extension to unscrew all the screws we find at the base, as shown in the video. In this way, we will significantly increase the trunk volume; then we install the seat backs and the bench, applying the reverse procedure of disassembly!

Posted on 21 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats of a BMW 3 Series
How to Remove the Rear Seats of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to remove the rear seats of a BMW 3 Series. Remove the seat bottom (lift the seat by hand) until it completely detaches from the floor …
How to Remove the Rear Seats on a BMW 3 Series
BMW Serie 3 (1982-1992 / E30) Here’s how to remove the rear seats on a BMW 3 Series: First, remove the metal guides at both ends of the backrest (mounted on the vehicle's body) us…
How to remove the rear seats of the BMW 3 Series
How to remove the rear seats of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Let's see together the main instructions that will allow us to disassemble and replace the rear seats of the BMW 3 Series. First we open the rear doo…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos