Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Handle of a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Handle

Want to remove the door handle of a BMW 3 Series? In this detailed video, we will briefly see how to take it off and remove it from the door housing. To start: remove the rubber cap located on the side of the door as shown in the video, then, using a screwdriver, unscrew the screw located in the door panel, extract the screw, and manually remove the lock. Disconnect the door opening handle along with the attached power connector. Install the new handle in the door with the new lock. Finally, attach the handle and tighten the lock with the screwdriver.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
How to remove the crankshaft oil seal of the BMW 3 Series.
How to remove the crankshaft oil seal of the BMW 3 Series.
BMW Serie 3 (2005-2013 / E92, E90, E91) Today's tutorial guide will show us how to disassemble and replace the crankshaft oil seal of the BMW 3 Series, following the instructions below. Fir…
How to find out the fuse diagram of a BMW Series 3
How to find out the fuse diagram of a BMW Series 3
BMW Serie 3 (1998-2006 / E46) The selected video shows the diagrams related to the fuse boxes present in a BMW Series 3 car. The fuse panels are located inside the vehicle's cabin…

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos