|
Do it yourself
| |||
| ||||
How to Remove the Window Regulator Motor from a BMW 3 Series
Model: BMW Serie 3
E46
- Years 1998-2006
How to remove the window regulator motor from your BMW and you don't know how to do it? Don't worry, let's see together in this video how to proceed. Before starting the disassembly, disconnect the battery terminals. If you can't find it, don't be afraid, in your BMW it is located in the rear hood, not the front like in most cars. Using a Torx screwdriver, unscrew the internal door handle, being careful not to scratch it. Remove the large clip with a plastic spatula and unscrew the screw located in the gap. Once removed, unscrew the one for the internal door opening lever as well. Detach the door panel, disconnect the window regulator and speaker connectors. Don't lose all the snap clips located behind the plastic panel you removed first. Now that we have removed the door panel, peel off the adhesive cover from the sheet metal. Now unscrew the window regulator motor with a screwdriver. Replace the part and reassemble everything in reverse order.
Updated on 25 February 2026 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 3
(1998-2006 /
E46)
Today's instructions will show us how to reset the window regulator motor of the BMW Series 3. First, let's get inside the vehicle and start by turni…
BMW Serie 3
(2005-2013 /
E90, E92, E91)
The following steps will show us how to disassemble and replace the rear window regulator mechanism of the BMW 3 Series. First, we open the rear door…
BMW Serie 3
(1998-2006 /
E46)
Using a small pry bar, disengage the clips that secure the weatherstrip in the glass passage slot and remove it. Remove the glass from its housing by…
Other guides you may be interested in
|
How to Remove the Centre Console on a Renault Kangoo
To remove the centre console on a Renault Kangoo, use a plastic lever to pry off the trim located at the bottom of the centre console. Remove the leather gaiter from the gear lever. After removing the gaiter, unscrew the securing screw located at the rear of the centre console (if present). Once this is done, pull the console away and disconnect any power cables. Finally, insert the new part into the centre console space and reassemble all components as they were removed. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.088
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
