Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter on the Buick Cascada

Model: Buick Cascada MK 1 - Years 2016-2019
Part: Cabin air filter

In order to replace the passenger compartment air filter it is necessary to open the passenger side door; on the outside of the dashboard there is a plastic panel which must be removed by pulling it towards you. At that point, locate the four storage compartment support screws located on the four corners and unscrew them and extract the storage compartment. On the bottom there is a plastic cover that must be opened and inside there is the filter. Remove it and position the new filter suitable for the type of vehicle (see use and maintenance manual). Then close the lid and refit the glove compartment and the plastic panel.

Posted on 28 March 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

How do I replace the Buick Cascada's oil filter?
How do I replace the Buick Cascada's oil filter?
Buick Cascada (2016-2019 / MK 1) In order to replace the Buick Cascada's oil filter, you need to lift the car, so that you have access to the components in the lower part of the engi…
How to remove the door panel of the Buick Cascada
How to remove the door panel of the Buick Cascada
Buick Cascada (2016-2019 / MK 1) Let's see in this guide the main instructions to be able to remove and replace the front door panel of the Buick Cascada. First of all, we open the f…
How to open the hood of the Buick Cascada
How to open the hood of the Buick Cascada
Buick Cascada (2016-2019 / MK 1) In today's video we will see how to open and close the hood of the Buick Cascada. Being the same model, this video also applies to the Opel and Vauxh…

Other guides you may be interested in

How to Install the Original Car Radio in a Mitsubishi Colt

How to install the original car radio in a Mitsubishi Colt? This video carefully shows how to disassemble and reassemble it. Unscrew the screws on the central dashboard using a screwdriver as shown in the video, then, using a plastic or metal lever, pry off the central trim of the dashboard. Remove the frame from the dashboard, and take out the plastic glove compartment along with the trim. Unscrew the retaining screws around the car radio, remove the stereo from the dashboard (disconnecting the various power cables). Finally, reassemble the car radio in the dashboard as it was disassembled earlier.

Watch the video!


by ScegliAuto

More videos