Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Shift Knob on a Buick Regal

Model: Buick Regal MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Shift knob

See other generations:
Video tutorial

Follow these main instructions to remove and replace the shift knob on a Buick Regal without using tools. First, get inside the vehicle and pull the shift knob upward with force to detach it along with the boot.

Next, separate the boot from the knob to replace it with the new one, as shown in the video. At this point, install the new shift knob, securing it properly onto the lever, and reattach the shift boot by reversing the procedure!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Shift Knob on a Buick Regal?
How to Replace the Shift Knob on a Buick Regal?
Buick Regal (2009-2017 / MK 5) To replace the shift knob on a Buick Regal, use a tool to pry up the trim around the shift lever. Once this is lifted, fully remove the shift boot to…
How to Replace the Shift Knob on a Buick Regal
How to Replace the Shift Knob on a Buick Regal
Buick Regal (2018-2023 / MK 6) In today's tutorial video, you will see the steps to remove and replace the shift knob on a Buick Regal. First, get inside the vehicle and start by d…
How to Change the Shift Knob on a Buick Regal
How to Change the Shift Knob on a Buick Regal
Buick Regal (2018-2023 / MK 6) To replace the shift knob on the Buick Regal, remove the shift boot, which comes off easily as it is press-fit. A small metal seal must be removed fr…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos